Introduction
Setting multi-functional in one, our high-performance DN-D5Z lapping instrument is fast and accurate, equipped with automatic tool change, the machine is easy to use while at the same time has a stable fine and diverse lapping effect. What’s more, the high-speed and high-precision machining with large-angle machining can produce dental restorations that are recognized by their outstanding surface and excellent accuracy of fit.
Technologies
● 5-axis: The combined 5-axis is designed to achieve high-precision interpolation and high-speed response to maximize your productivity.
● Microstep closed-loop motors+Ball Screws: High accuracy and stability; highly-flexible
● Integrated high precision, high quality tool inspector: Equipped with the detection of tool length and tool breakage
● QY-Tech cutting system: Seamless connection between embedded computers + motion controllers
● Gas source safety monitoring: The device stops operation when air pressure falls below 0.4MPa
● HD Smart Control Touchscreen: Integrate a series of functions such as tool setting, tool changing, calibration and so on
● High-performance and high-precision closed-loop motors: Stable output; low noise level; long life expectancy
Parameters
Type of equipment |
Tabletop pneumatic 5-axis machine |
Applicable materials(Discs φ98) |
Zirconium oxide+PMMA+PEEK |
Efficiency |
9 to 16 minutes/pc |
X*Y*Z Stroke (in/mm) |
148x105x110 |
Angle (in degrees) |
A +30°/-145° |
Working temperature |
20~40℃ |
X.Y.Z.A.B drive systems |
Micro-step servo motors+Ball Screws |
Repeat positioning accuracy |
±0.02mm |
Wattage |
Whole machine ≤ 1.0 KW |
Power of spindle |
180W |
Speed of spindle |
10000~40000r/min |
Way of tool changing |
Pneumatic tool changer |
Magazine capacity |
Four |
Diameter of the knife handle |
¢4mm |
The size of knife |
R1.0 R0.5 R0.25 R0.15 |
Noise level |
~60dB(at work) |
~35dB(standby state) |
|
Supply voltage |
220V 50/60Hz |
Weight |
48Kg |
Size(mm) |
50×41×43.5 |
Features
● Flexible in use: The equipment is available as an affordable starter model, and can also be used to extend grinding systems of laboratories and cutting centers.
● Small in size and stylish in appearance.
● Stable all-aluminium frame construction.
● High efficiency: The cutting time of single zirconia can be controlled between 9 and 16 minutes.
● The DN-D5Z integrates high precision, high quality tool setter with 0.02mm repeat positioning accuracy
● The device is combined with high-performance touchscreens, together with tool setting, changing and alignment functions, which is easy to operate.
● With French Worknc typesetting software, the device stands out for high reliability, high efficiency, high precision and simple operation.
● The cutting tasks can be transferred via WiFi, network cable or USB memory sticks, which is convenient and time-saving.
● The rotation speed of the new high precision electric spindle can reach 60,000 rev/min with integrated pneumatic tool changing function.
● The simultaneous interpolation of the five-axis : X/Y/Z/A/B, provides larger swivel angle, so that more complex and delicate products can be processed.
● The removable tool magazine is specially designed for daily maintenance and tool replacement.
● The coloured LED signal lights serve to indicate machine errors and operating status.
● More efficient operation with modern design and user interface
Finished product demonstration
By use of our DN-D5Z zirconia grinder, the users can make the products whatever they need.
Dental milling machine
Dental 3D printer
Dental Sintering furnace
Dental Porcelain furnace